New Products
Find Alloy Wire, Nickel Alloy Wire, Alloy Steel on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Model No.: N06686/inconel 686
Element | Content (%) |
---|---|
Nickel, Ni | 59 |
Chromium, Cr | 19-23 |
Molybdenum, Mo | 15-17 |
Iron, Fe | ≤ 5 |
Tungsten, W | 3.0-4.40 |
Manganese, Mn | ≤ 0.75 |
Phosphorous, P | ≤ 0.040 |
Sulfur, S | ≤ 0.020 |
Titanium, Ti | 0.020-0.25 |
Carbon, C | ≤ 0.010 |
Properties | Metric | Imperial |
---|---|---|
Density | 8.72 g/cm³ | 0.315 lb/in³ |
Melting point | 1338-1380 °C | 2440-2520 °F |
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 721.9 MPa | 104700 psi |
Yield strength (@strain 0.200%) | 364 MPa | 52800 psi |
Elastic modulus | 207 GPa | 30000 ksi |
Shear modulus | 77 GPa | 11200 ksi |
Poisson's ratio | 0.34 | 0.34 |
Elongation at break | 71% | 71% |
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@21-100°C/69.8-212°F) | 11.97 µm/m°C | 6.650 µin/in°F |
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | |
Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
Welding rodΦ2.4mm/3.2mm/4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Product Categories : Nickle Alloy