1.4547 S31254 Super Austenite Stainless Steel Pipe and Tube China Manufacturer

New Products

Home > Products > Stainless Steel > Other Stainless Steel > 1.4547 S31254 Super Austenite Stainless Steel Pipe and Tube

1.4547 S31254 Super Austenite Stainless Steel Pipe and Tube

Payment Type:	L/C, T/T, Western Union, Paypal
Min. Order:	1

Basic Info

Model No.: Super Austenite

Product Description

Model NO.: Super Austenite Standard: ASTM, AISI, DIN, EN Certification: SGS, BV, AISI, ASTM, EN, DIN Technique: Hot Rolled Trademark: Super Austenite Stainless Steel Specification: length 400-4000mm, width 40-100mm, thickness 3mm HS Code: 7209161000 Type: Stainless Steel Pipes Grade: 2B Shape: Round Surface Treatment: Bright Transport Package: Standard Packing Origin: China

Introduction
Stainless steel grade 254 SMO™ is a very high end austenitic stainless steel. It is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with strength that is twice that of the stainless steel 300 series.
For certain applications, grade 254 SMO™ has been reported to be a cost-effective substitute for high nickel and titanium alloys. It is known to possess excellent workability as well.
The following sections will discuss in detail about stainless steel grade 254 SMO™.
Chemical Composition
The chemical composition of stainless steel grade 254 SMO™ is outlined in the following table.ElementContent (%)

Iron, Fe	55.69
Chromium, Cr	20
Nickel, Ni	18
Molybdenum, Mo	6.1
Nitrogen, N	0.20
Carbon, C	0.010

Physical Properties
The physical properties of stainless steel grade 254 SMO™ are tabulated below.PropertiesMetricImperial

Density

8 g/cm3

0.289 lb/in3

Mechanical Properties
The following table shows mechanical properties of stainless steel grade 254 SMO™.PropertiesMetricImperial

Tensile strength	680 MPa	98600 psi
Yield strength	300 MPa	43500 psi
Modulus of elasticity	195 GPa	28300 ksi
Shear modulus	75 GPa	10900 ksi
Poisson's ratio	0.30	0.30
Elongation at break	50 %	50 %
Hardness, Brinell	210	210

Thermal Properties
The thermal properties of stainless steel grade 254 SMO™ are tabulated below.PropertiesMetricImperial

Thermal expansion co-efficient (@20-100°C/68-212°F)	16.5 µm/m°C	9.17 µin/in°F
Thermal conductivity	14 W/mK	97.2 BTU in/hr.ft².°F

Other Designations
Other designations that are equivalent to stainless steel grade 254 SMO™ include the following.

ASTM A813	ASTM A469	ASTM A269	ASTM A240	ASTM A182 (F44)
ASTM A814	ASTM A312	ASTM A249

Fabrication and Heat Treatment
Machinability
Stainless steel grade 254 SMO™ is quite tough to machine due to the extremely high work hardening rate and lack of sulfur content; however using sharp tools, overpowered machine tools, positive feeds, good amount of lubrication, and slow speeds tend to provide good machining results.
Welding
Welding of stainless steel grade 254 SMO™ requires filler material without which it results in poor strength properties. Filler metals such as AWS A5.14 ERNiCrMo-3, and alloy 625 are recommended. Electrodes used in the process, have to match with AWS A5.11 ENiCrMo-12.
Annealing
Annealing of this material should be performed at 1149-1204°C (2100-2200°F), which should be followed by a water quench.
Hot Working
Forging, upsetting and other operations relating to this material can be performed at 982 - 1149°C (1800 - 2100°F). It is recommended that temperatures do not exceed this range as it would result in scaling and reduction in the workability of the material. To re-attain maximum corrosion resistant properties, it is advisable to perform post-process annealing.
Cold Working
Cold working can be carried out using all the traditional methods; however the process would be tough due to its high work hardening rate. The result will provide the material with increased strength and toughness.
Hardening
Stainless steel grade 254 SMO™ does not respond to heat treatment. Hardening is possible only through cold reduction.
Applications
Stainless steel grade 254 SMO™ is used in the following areas:
Saltwater handling
Tall oil distillation columns
Flue gas desulfurization scrubbers
Components used in petroleum production
Food processing equipment
Process equipment in chemical industry
Bleaching equipment in the pulp and paper industry
Flue-gas cleaning
Desalination
Heat exchangers
Contact us:
Dear my friend,
How are you? What are you still waiting for. Get in touch with us. The first contact we will have a special price and unexpected surprise.

BOZHONG STEEL GROUP
Address: Floor 5, Building 32, No.518 Xinzhuan Rd., High - Tech Industrial Park 201601, Shanghai, China
Tel: +86-02167660085
Fax: +86-02167897500

Contact us if you need more details on Stainless Steel Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Super Austenite、254 Smo. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Stainless Steel > Other Stainless Steel

Premium Related Products