N0 6600 Stainless Steel Pipe China Manufacturer

New Products

Home > Products > Stainless Steel > Stainless Steel Pipe > N0 6600 Stainless Steel Pipe

N0 6600 Stainless Steel Pipe

Product Description

Type: Seamless Material: Stainless Steel Usage: Pipeline Transport, Boiler Pipe, Oil/Gas Drilling, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose Trademark: Bao Steel Specification: diameter 10 to 200mm HS Code: 7304419000 Technique: Cold Rolled Surface Treatment: Polished Section Shape: Round Transport Package: Fumigated Wooden Box Origin: China

Introduction

Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures.

Chemical Composition of Inconel 600

The compositional range for Inconel 600 is provided in the table below.

Element	Content
Nickel (Ni)	72 % min
Chromium (Cr)	14 - 16 %
Iron (Fe)	6 - 10 %

Typical Properties of Inconel 600 Typical properties of Inconel 600 are covered in the following table.

Property	Metric	Imperial
Density	8.47 g/cm³	0.306 lb/in³
Melting point	1413 °C	2575°F
Co-Efficient of Expansion	13.3 µm/m.°C (20-100°C)	7.4x10^-6 in/in.°F (70-212 °F)
Modulus of rigidity	75.6 kN/mm²	10965 ksi
Modulus of elasticity	206 kN/mm²	29878 ksi

Properties of Supplied Materials and Heat Treated Materials

Condition of Supply	Heat Treatment (After Forming)
Annealed/Spring Temper	Stress relive at 460°C (860°F) for 1hr and air cool.
Condition	Approx Tensile Strength		Approx Service Temp.
Annealed	600-750 N/mm²	87-109 ksi	-200 to +330°C	-330 to +625°F
Spring Temper	900-1250 N/mm²	131-181 ksi	-200 to +330°C	-330 to +625°F

Note - In both cases slight magnetism may occur below -120°C (-184°F) Relevant Standards Inconel 600 is covered by the following standards: • BS 3075 and BS 3076 NA 14 • AMS 5687 • ASTM B166 Equivalent Materials Inconel 600 is the tradename of Special Metals Group of Companies and equivalent to: • W.NR 2.4816 • UNS N06600 • AWS 010 Applications of Inconel 600 Inconel 600 typically finds application in: • Furnace components • Chemical processing • Food processing and • Nuclear engineering. Stock

Form	Specification	Supply Form	Others
Sheet	Thickness:0.40-4.75mm,General Width:1000,1219,1500mm	Whole Coil or piece of it	Cold Annealed,Surface 2B,2E
Plate	Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)	Whole Coil or piece of it	Single hot rolling,Solid solution annealed state,Surface 1D
Belt	Thickness:0.10-3.0mm,Width:50-500mm	Whole Coil or Specified size	Cold Annealed,Surface 2B,2E
Bar & Rod	Rolled barΦ5-45mm,Length≤1500mm	Polished Bar(circle,Square)	Solution annealing,descaling
Bar & Rod	Forged barΦ26-245mm,Length≤4000mm	Polished Bar(circle,Square)	Solution annealing,descaling
Weld tube	Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm	Base on your requirement	Use for PHE
Seamless Tube	Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm	Base on your requirement	Use for PHE
Wire	Outer diameterΦ0.1-13mm	Base on your requirement	Ni & Ni Alloy, Ti & Ti Alloy
Forged piece	roundness and square alloy	Base on your requirement	Steel, Alloy
Flangs	All kinds of Flangs	Base on your requirement	Steel, Alloy
Welding Material	Coil wire Φ0.90mm/1.2mm/1.6mm	Base on your requirement	Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
	Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm
	Welding rodΦ2.4mm/3.2mm/4.0mm
Tube	Elbow, three links, four links, different diameter size	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy
Explosive bonded laminate	Raw Sheet Thickness≥2mm	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy

Contact us if you need more details on N0 6600 Stainless Steel Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about N0 6600、Stainless Steel Pipe. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Stainless Steel > Stainless Steel Pipe

Premium Related Products