New Products
Find Alloy Wire, Nickel Alloy Wire, Alloy Steel on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Model No.: N06059/alloy 59
Element | Content (%) |
---|---|
Nickel, Ni | 56 - 63 |
Chromium, Cr | 22 - 24 |
Molybdenum, Mo | 15 - 16.5 |
Iron, Fe | ≤1.5 |
Manganese, Mn | ≤0.5 |
Cobalt, Co | ≤0.3 |
Aluminum, Al | 0.1-0.4 |
Silicon, Si | ≤0.1 |
Phosphorous, P | ≤0.015 |
Carbon, C | ≤0.01 |
Sulfur, S | ≤0.005 |
Properties | Metric | Imperial |
---|---|---|
Density | 8.6 g/cm³ | 0.311 lb/in³ |
Properties | Metric | Imperial |
---|---|---|
Tensile strength (@sheet and strip 0.5 to 6.4 mm) | 690 MPa | 100000 psi |
Yield strength (@rod, bar, forgings > 100 mm) | 320 MPa | 46400 psi |
Modulus of elasticity | 210 GPa | 30500 ksi |
Elongation at break | 40% | 40% |
Properties | Metric | Imperial |
---|---|---|
Thermal expansion coefficient (@20-100°C/68-212°F) | 11.9 µm/m°C | 6.61 µin/in°F |
Thermal conductivity | 10.4 W/mK | 72.2 BTU in/hr.ft².°F |
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | |
Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
Welding rodΦ2.4mm/3.2mm/4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Product Categories : Nickle Alloy