Find Angle Head, Polish Fitting, Stainless Steel Pipe Fitting on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Stainless Steel > Stainless Steel Pipe > Super Alloy Inconel C276 Stainless Steel Pipe

Super Alloy Inconel C276 Stainless Steel Pipe

Product Description

Type: Seamless Material: Stainless Steel Usage: Pipeline Transport, Boiler Pipe, Oil/Gas Drilling, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose Trademark: Bao Steel Specification: diameter 10 to 200mm HS Code: 7304419000 Technique: Cold Rolled Surface Treatment: Polished Section Shape: Round Transport Package: Fumigated Wooden Box Origin: China

Introduction

Inconel is a group of austenitic nickel-chromium-based super alloys produced by Special Metals Corporation. Super alloys are referred to as high performance alloys that function well in environments with elevated temperatures.

Super alloy INCONEL C-276 has high molybdenum content which provides the material with localized corrosion resistance like pitting. This alloy is generally known for corrosion resistance in a wide range of aggressive media. The low carbon content in this alloy helps to reduce carbide precipitation while performing welding.

The following section explains in detail about super alloy INCONEL C-276.

Chemical Composition

The chemical composition of INCONEL C-276 is outlined in the following table.

Element Content (%)
Molybdenum, Mo 15-17
Chromium, Cr 14.5-16.5
Cobalt, Co 2.5 max
Manganese, Mn 1
Vanadium, V 0.35 max
Silicon, Si 0.08 max
Phosphorus, P 0.04 max
Sulfur, S 0.03 max
Carbon, C 0.01 max
Nickel. Ni 62.5-67.5
Physical Properties The physical properties of INCONEL C-276 are tabulated below.
Properties Metric Imperial
Density 8.89 g/cm3 0.321 lb/in3
Melting point 1325 °C 2417 °F
Mechanical Properties The following table shows mechanical properties of INCONEL C-276.
Properties Metric Imperial
Tensile strength 740.5 MPa 107400 psi
Yield strength 347 MPa 50300 psi
Elastic modulus 205 GPa 29700 ksi
Elongation at break 67% 67%
Thermal Properties The thermal properties of INCONEL C-276 are tabulated below.
Properties Metric Imperial
Thermal conductivity (@23°C/73.4°F) 9.80 W/m-K 68.0 BTU in/hr.ft².°F
Fabrication and Heat treatment Welding Weldability of Inconel Alloy C-276 is rated as good. This material can be used as-welded for most applications. Hot Working Hot working of this alloy can be performed 870 and 1230°C (1600 and 2250°F). in case of performing heavy working, it has to be above 1090°C (2000°F). Annealing INCONEL alloy C-276 can be annealed at 1150-1175°C (2100-2150°F) and rapidly cooled by water quenching. Applications INCONEL C-276 is chiefly used in the following areas: Chemical processing Pollution control Pulp and paper production Industrial and municipal waste treatment Recovery of sour natural gas. Products made using INCONEL C-276 are as follows: Air pollution control components such as ducts, stack-gas re-heaters, dampers, stack liners, scrubbers, fans and fan housings Components required in chemical processing such as reaction vessels, heat exchangers, evaporators, and transfer piping.   Stock

Form

Specification

Supply Form

Others

Sheet

Thickness:0.40-4.75mm,General Width:1000,1219,1500mm

Whole Coil or piece of it

Cold Annealed,Surface 2B,2E

Plate

Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)

Whole Coil or piece of it

Single hot rolling,Solid solution annealed state,Surface 1D

Belt

Thickness:0.10-3.0mm,Width:50-500mm

Whole Coil or Specified size

Cold Annealed,Surface 2B,2E

Bar & Rod

Rolled barΦ5-45mm,Length≤1500mm

Polished Bar(circle,Square)

Solution annealing,descaling

Forged barΦ26-245mm,Length≤4000mm

Weld tube

Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm

Base on your requirement

Use for PHE

Seamless Tube

Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm

Base on your requirement

Use for PHE

Wire

Outer diameterΦ0.1-13mm

Base on your requirement

Ni & Ni Alloy, Ti & Ti Alloy

Forged piece

roundness and square alloy

Base on your requirement

Steel, Alloy

Flangs

All kinds of Flangs

Base on your requirement

Steel, Alloy

Welding Material

Coil wire Φ0.90mm/1.2mm/1.6mm

Base on your requirement

Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.

Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm

Welding rodΦ2.4mm/3.2mm/4.0mm

Tube

Elbow, three links, four links, different diameter size

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Explosive bonded laminate

Raw Sheet Thickness≥2mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

 

Contact us if you need more details on Inconel C276 Stainless Steel Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Inconel C276、Stainless Steel Pipe. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Stainless Steel > Stainless Steel Pipe

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters