New Products
Find Angle Head, Polish Fitting, Stainless Steel Pipe Fitting on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Payment Type: | L/C, T/T, Western Union |
---|
Model No.: N02201/Ni201 Nickel 201 Alloy
Element | Content (%) |
---|---|
Nickel, Ni | ≥ 99 |
Iron, Fe | ≤ 0.4 |
Manganese, Mn | ≤ 0.35 |
Silicon, Si | ≤ 0.35 |
Copper, Cu | ≤ 0.25 |
Carbon, C | ≤ 0.020 |
Sulfur, S | ≤ 0.010 |
Properties | Metric | Imperial |
---|---|---|
Density | 8.89 g/cm3 | 0.321 lb/in3 |
Melting point | 1435 - 1446°C | 2615 - 2635°F |
Properties | Metric | Imperial |
---|---|---|
Tensile strength (annealed) | 403 MPa | 58500 psi |
Yield strength (annealed) | 103 MPa | 14900 psi |
Elongation at break (annealed prior to test) | 50% | 50% |
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@20-100°C/68-212°F) | 13.1 µm/m°C | 7.28 µin/in°F |
Thermal conductivity | 79.3 W/mK | 550 BTU.in/hrft².°F |
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E |
Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | Use for PHE |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | |
Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | |||
Welding rodΦ2.4mm/3.2mm/4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Product Categories : Stainless Steel > Stainless Steel Pipe