Model NO.: ca7143 Standard: AISI, ASTM, DIN, JIS, GB Composition:
Stainless Steel Scrap Shape: Round Special Use: Wear Resistant Steel Trademark: without Specification: DN10~450 HS Code: 76210000 Type: Round Steel Grade: Inconel Technique: Cold Rolled Surface Treatment: Coated Application: Boiler Plate Transport Package: Plastic Wraping Origin: China
Specifications
100% PMI;100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test
Description & Name:
Inconel 625 pipe UNS N06625
Nickel Alloy seamless tube ASME SB444
Standard: ASTM/ASME B/SB 444
Material: Inconel 600,625,617,690,693, Monel 400,
Monel K500,Incoloy800/800H/800HT,825, Alloy20,Alloy28. Hastelloy C276,AL6XN,N08028 etc.
UNS N06625 Chemical Composition% |
Alloy Designation | Element | C | Ni | Cr | Mn | Fe | Si | Mo | Al | Ti | Co+Ta | P | S |
Inconel 625 | Min. % | - | 58 | 20 | - | - | - | 8 | - | - | 3.15 | - | - |
Max. % | 0.1 | - | 23 | 0.5 | 5 | 0.5 | 10 | 0.4 | 0.4 | 4.15 | 0.015 | 0.015 |
Mechanical Propeties | Inconel625 |
Density: | 8.4g/cm3 |
Melting Point: | 1290-1350°c |
Tensile Strength Min.(Mpa): | 690 |
Yield Strength Min. (MPa): 0.2% offset | 276 |
Elongation A 5%(min.): | 30 |
HB Max.: | 220 |
Nominal Dia: 1/2 "to 10" NB for
Seamless PipeSchedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:
30 m(Max) or as your requirement
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end
Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test Procedure
1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material |
2.100% Dimension & Visual Examination |
3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test |
4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT) |
5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor) |
6.Straightness Test (optional) |
7.Roughness Test (optional) |
8.Intergranular Corrosion Test(optional) |
9.Impact Test (optional) |
10.Grain Size Determinations (optional) |
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION. |
>>Seamless Pipe Production Facilities
>>Production Process
>>Laboratory Instrument & Test Equipment
Contact us if you need more details on Incoloy Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Nickel Pipe、625 Alloy. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Stainless Steel > Stainless Steel Pipe